Andersen G-1 Pull Easy Bike Mount for Luggage Rack
Andersen bike mount for luggage rack — G-1 Pull Easy is a lockable coupling with reflector that you use to couple a shopping trolley to your bicycle. The mount sits on the side of the luggage rack, and you can use the rack as usual when the trolley is uncoupled.
How the mount sits on the luggage rack
You screw the coupling permanently along the side of the luggage rack, where it stays. You then couple the trolley on and off with one movement, so you can ride on without the trolley whenever you like. A lock with two keys is included, and you lock the coupling so that it cannot be lifted off.
A red reflector points backwards on the coupling arm. The mount also works on many e-bikes and pedelecs up to 25 km/h.
Trolley coupling for bicycle – what else you need
The coupling is one half of the Andersen Bike & Easy system. You therefore also need a coupling pin on the trolley: SH-1 for Scala, Komfort, Royal and Royal Plus, or SH-2 for Tura, Unus and Unus Fun. The pin stays on the handle even when you walk with the trolley, so it does not get in the way in normal use.
Does the mount fit your bike?
The luggage rack must carry at least 25 kg and have round tube struts with a diameter of 8 to 16 millimetres. The width between the struts must be between 103 and 170 millimetres, and flat or oval tubes do not work. The coupling point must sit 60 to 78 centimetres above the ground, and the angle to the trolley may be at most 50 degrees.
Benefits of G-1 Pull Easy
- Couples the trolley on and off with one movement
- Lock with two keys included – the coupling stays put even when the bike is parked
- Red reflector facing backwards for visibility in traffic
- You can use the luggage rack as usual
- Works on many e-bikes and pedelecs up to 25 km/h
- Takes a loaded trolley of up to 30 kg
Who does the bike mount suit?
The mount suits you if you want to shop without a car and couple a shopping trolley to your bicycle instead of carrying the bags home. A lockable coupling with reflector is also handy at the allotment or on longer rides where you need to bring more than fits in a pannier. See more bike mounts in our range, and read more about the history of Andersen Shopper® Manufaktur.
| Type: | Bicycle coupling for luggage rack, Bike & Easy |
| Fits luggage rack: | With at least 25 kg load capacity |
| Tube struts: | Round tubes, 8–16 mm in diameter |
| Width between struts: | 103–170 mm |
| Coupling height: | 60–78 cm above the ground |
| Max angle to the trolley: | 50 degrees |
| Max load on the coupling: | 6 kg |
| Max weight of loaded trolley: | 30 kg |
| E-bike: | Works on many pedelecs up to 25 km/h |
| Reflector: | Red, facing backwards |
| Lock: | Lock with two keys included |
| Required on the trolley: | Coupling pin SH-1 or SH-2, sold separately |
| Manufacturer: | Andersen Shopper® Manufaktur (Germany, since 1958) |