Over ResMed Tube Warmer for Standard Tube
ResMed tube warmer for the standard tube — a microfibre insulating sleeve for the 22 mm ResMed standard tube that dampens condensation overnight. It is 2 m long and opens along its full length with a zip.
How the sleeve goes on
You open the zip along the whole length, lay the sleeve around your 22 mm ResMed standard tube and close it again, so the tube sits inside the microfibre filling. That cuts both the condensation and the noise. The smooth outer fabric slides against the bedding rather than catching on it, which reduces the tug on the mask.
Do not use the sleeve where the room temperature is above 30 °C, because the air can then arrive at the mask too warm.
Benefits of the sleeve
- Microfibre filling that insulates and dampens condensation
- Smooth outer fabric that glides over the bedding
- Zip along the full length for easy fitting
- Less tug on the mask and a steadier seal
- Protects the tube from wear and extends its life
- 2 m long for the 19 mm standard tube
Who is the sleeve for?
It suits you using a ResMed standard tube who wakes to condensation in the tube or a cold draught arriving at the mask. See more other CPAP accessories, or read about obstructive sleep apnoea on HSE.ie.
| Type: | Tube warmer / insulating sleeve |
| Fits: | ResMed standard tube |
| Length: | 2 m |
| Diameter: | 19 mm |
| Filling: | Microfibre |
| Closure: | Zip along the full length |
| Do not use above: | Room temperature 30 °C |
| Manufacturer: | ResMed |